setting up a dyndns

I chose to go with spdns.de, no particular reason so far, except they're free and have IPv6 (which I'm not using yet)
install ddns-scripts
install luci-app-ddns
install wget (only needed for https)
install ca-certificates
then (might take a browser refresh) under services>Dynamic DNS>mydns_Ipv4>EDIT

essentially input your chosen name, username and passwd, tick the boxes, and you are done.
don't forget to start the script though :)

now, while we are at it, why not enable https for luci as well,
install luci-ssl
/etc/init.d/uhttpd restart
done: luci over https://

Comments

Post a Comment

Popular posts from this blog

Traffic accounting

Got this from here: http://www.catonmat.net/blog/traffic-accounting-with-iptables/ All i'm interested in is my monthly bandwidth consumption, not the individual devices, there are plenty of forum threads/tools to do that. But why bring in additional tools when iptables has it all? iptables -N TRAFFIC_ACCT iptables -I FORWARD -j TRAFFIC_ACCT iptables -A TRAFFIC_ACCT and to just get the number: iptables -L TRAFFIC_ACCT -v | sed -n 3p | cut -d' ' -f2 to reset the counters /usr/sbin/iptables -L TRAFFIC_ACCT -Z the cron job to reset at the begining of the month, and a daily telegram msg 1 0 1 * * /usr/sbin/iptables -L TRAFFIC_ACCT -Z  0 8 * * * /usr/bin/curl -s -X POST https://api.telegram.org/<BOTID>/sendMessage -d chat_id=<CHATID> -d text="$(/usr/sbin/iptables -L TRAFFIC_ACCT -v | /bin/sed -n 3p | /usr/bin/cut -d' ' -f3)" >/dev/null 2>&1 (you'll need to opkg install ca-bundle for the https to work)
Read more

QoS with SQM (and something about bufferbloat)

another feature that came with stock zyxel fw is their 'optimized' (the one with the 400mbps nag) QoS packages. As far as i can tell the standard SQM package should come pretty close. install uci-app-sqm a Network>SQM QoS menu item will appear check enable, double check your interface name is really your wan port(eth1), and set your down/up speeds to what you measured with e.g. dslreports . under linklayer adaptation set to Ethernet (for VDSL) with 8 bytes overhead. i reran the test, and it seems my up/down throughput dropped about 10%,  but my bufferbloat report went from D to B.... whatever that means in reality I'll have to find out :)
Read more

Ath10k alternative driver firmware - CC15.05.1 wireless unstable

I'm still experiencing trouble with the 5Ghz, maybe even WRT in general, up to the point I'm considering going back to the original Zyzel AA release. One last effort to see if this helps: I'm currently running an alternative driver firmware for the  QCA988X get it from github i'm running the last of the 4 series 10.2.4.48 (not sure if running the 5 series is possible, something for later) rename the file to firmware-4.bin and replace the one that's already there in /lib/firmware/ath10k/QCA988X/hw2.0 There's probably a way to force WRT to reload the driver, but hey I rebooted. First look seems fine, let's see if it's more stable. -- update -- leaving channel selection on 'auto' didn't work - 5G did not come up. (no mesgs as to why) manually selecting a channel did seem to work, at least when also selecting a 20Mhz bandwidth, 40Mhz seemed to work but I had some devices not connecting properly. -- update2 -- 5G was mostly s...
Read more